50 Miles From Bismarck, ND

Customize your Search Radius & Location

Automobiles226

More Links

Hire It HauledFree / Giveaway ItemsPet GiveawaysWant AdsTradingStores & Dealers

My Links

Saved Searches0 Watch List0 Recently Viewed0

Mechanical Part

222 Results
Matt
2024-11-15 04:32:13
2 Photos
1957 corvette intake manifold 3731398
Originally on a 283, fits Chevy small block
Mandan, ND
$100  OBO
Stehe
2024-11-14 19:58:18
3 Photos
I have a complete distributor for a 1988 GM 5.7. From a previous project. In
working order. It does have a new cap.
Mandan, ND
$75  OBO
Jason
2024-11-14 17:36:05
3 Photos
1969 Ford 351w block
I had this cleaned and crack checked and was good. Needs 3 sleeves, has light surface rust since pictures were taken. I have other parts of it for sale as well just ask me what
Mandan, ND
Make an Offer
Jason
2024-11-14 17:35:33
3 Photos
1967-73 Ford Mustang 8 inch Rear Differential Housing
Bare 8 inch mustang rear end housing. 55 13/16 inches wide to outside of flanges. Leaf spring perches are about 43 1/8 inches on center. Nice
Mandan, ND
$125
Chevy29
2024-11-14 09:04:20
2 Photos
241c Chevy transfer case
It was paired with a 4l80e Removed from a 1994 170k
McClusky, ND
$150  OBO
Harlan
2024-11-14 08:44:06
3 Photos
(Used) Stock Intake Manifold for 1975 454 Cu. In. Engine
(Used) Stock intake manifold for 1975 454 cu.in. engine. Casting numbers 340218, K22 74, conv/3
Bismarck, ND
$50
Doc
2024-11-14 06:16:42
3 Photos
2008 Acadia REAR Break rotors. This set of REAR Break rotors should fit other simi
lar year models. New in the box.
Bismarck, ND
$60
BOSS
2024-11-14 06:11:06
3 Photos
5.7 HEMI ENGINE
2005 140,000 miles, still mounted in partial 4 x 2 truck with 5 speed auto transmission, 3.92 ratio anti-spin differential. Has above average 275/60R22 tires and chrome rims.
Bismarck, ND
$1,600
mikejc12
2024-11-14 00:08:51
3 Photos
Chevy sbc 3998991 heads Cleaning out shed 150obo
Chevy sbc 3998991 heads Cleaning out shed 200obo
Mandan, ND
$150
mikejc12
2024-11-14 00:08:46
2 Ford 351W flex plates Is what I was told Dont know a lot about ford parts cleani
ng out shed 100 obo
Mandan, ND
$75  OBO
mikejc12
2024-11-14 00:08:39
5 Photos
2 sets of 351W heads
Casting is E5AE-CA on all 4One head lost a valve seat Cleaning out shed
Mandan, ND
$200  OBO
mikejc12
2024-11-14 00:08:28
3 Photos
350 4 bolt main block Says 83 k10 on tag when bought from a guy in Mandan Was gonn
a use for hobby stock $300
Mandan, ND
$300
mikejc12
2024-11-14 00:08:21
3 Photos
350 4 bolt main block and crank Had stock pistons when disassembled Came out of a
80s k20 truck Was going to use for hobby stock but never happened $300
Mandan, ND
$300
mikejc12
2024-11-14 00:08:13
2 Photos
2 351W crankshafts Ones a 2 piece other is a 1 piece rear seal $300 OBO
Mandan, ND
$300
Jordan
2024-11-13 15:37:09
2 Photos
2 lift for 73-87 k10/k20 or suburban/blazer up to 91. Was on a 84 k20 for roughly
2” lift for 73-87 k10/k20 or suburban/blazer up to 91. Was on a 84 k20 for roughly a year and out about 300 miles on it. Swapped it out for a 4” lift. Need bushings and u bolts
Bismarck, ND
$200
Al Met
2024-11-13 10:24:53
5 Photos
FRONT AND REAR BRAKE PADS FOR 2012 EXPEDITION
(OR F150 PICK-UP) NEW IN BOX. $40 FOR BOTH SETS OR $20 EACH
Bismarck, ND
$40
Harlan
2024-11-12 08:35:17
3 Photos
(Used) Carter Quadro Jet
carburetor. Had a new kit installed and worked just fine before being put in storage.
Bismarck, ND
$100
Harlan
2024-11-12 08:35:07
3 Photos
(Used) Rochester Quadro Jet
carburetor. New kit installed, and worked just fine before being put in storage. Does need a vacuum choke pull off.
Bismarck, ND
$90
5ohcasey
2024-11-11 18:51:42
4 Photos
Cummins 8.3L pistons. Brand new in the box PAI brand pistons for a Cummins 8.3L en
Cummins 8.3L pistons. Brand new in the box PAI brand pistons only for a Cummins 8.3L engine. No rings , Piston pin or clips. These have never been installed, I only have 5 of these as one was
Lincoln, ND
$80  Each
Dale
2024-11-11 17:16:18
5 Photos
350 SBC Chevy Long Block Engine Components
350 SBC Chevy Long Block Purchased for a project and decided to go another route. Block is a 1969 350 casting number 3956618 that is bored 30 over Pistons are Speed-Pro Hypereutectic dome H617CP Crank
Bismarck, ND
$1,000
Mr Bear
2024-11-10 16:35:27
Wanted! SBC Aluminum Intake Manifold.
Pre 86 Spread bore dual plane intake. Aluminum aftermarket only. Thank you
Baldwin, ND
Larry
2024-11-10 13:36:33
3 Photos
Niehoff terminal lead assortment for older cars with points and condensors.
Bismarck, ND
$15
Nar1662
2024-11-10 05:03:08
Set of 10 modular ignition coil harnesses
New-forgot to return
Bismarck, ND
$10
Jay
2024-11-09 15:46:09
3 Photos
Garrett Turbo Came out of an LBZ 2007 classic Duramax. Bearings are going out. F
or parts or conversion piece Has some usable parts.
Mandan, ND
$40  OBO
STR3CHNTZ
2024-11-09 14:27:12
Miscellaneous 2000 8GMC Sierra 2500 parts
Mandan, ND
Make an Offer
Mason
2024-11-08 16:52:54
3 Photos
Acura J32a3 engine and 5AT trans. Pulled from 2006 Acura TL ASPEC. 166,7xx miles
but engine was rebuilt around 120k I believe when the serpatine belt got wrapped in the timing belt. I have videos
Bismarck, ND
$600  OBO
Walleye10
2024-11-08 13:16:11
2013 Toyota Camry rear brake rotors
Bismarck, ND
$49  OBO
LBH
2024-11-08 07:19:48
Ford 429/460 valve covers, good shape I just used them for painting an engine
make me an offer
Wilton, ND
$20  OBO
LBH
2024-11-08 07:19:24
2 Photos
Ford 460 cooling fan, does not use fan clutch
Make me an offer
Wilton, ND
$20  OBO
LBH
2024-11-08 07:19:14
2 Photos
Ford C6 torque convertor factory stall approximately 20k miles it worked perfect
I just upgraded, was behind a 460 big block make an offer
Wilton, ND
$50  OBO
222 Ads | Page 1 of 8 | Jump to Page: