Hay Equipment it

568 John Deere Mega wide baler

15,000 bales Runs very well Comes with monitor and moisture sensor 1000 pto Net wrap

Hay Equipment - Bismarck, ND

$12,500

2024-11-04 12:15:49

6 Photos

Baler belt splice kit

Hay Equipment - Linton, ND

$500

2024-11-03 17:46:33

16 wheel H&S vrake has wind guards on all wheels and silencer bands on front

four wheels on each side. I had the opening and closing pivot point redone on each side since that seams like a weak spot

Hay Equipment - Linton, ND

$8,500 OBO

2024-11-03 10:01:32

16 foot rock block for discbine. Believe to be a season old. In good shape, left b

racket is slightly tweeked. Was on a macdon r80/r85 can fit other discbinesAsking 750$ all mounts come with.Located

Hay Equipment - McClusky, ND

$750 OBO

2024-11-02 15:59:40

Has about 18,000 bales on it. 540 pto. Moniter included. Could use new belts and some pick up teeth. Needs a twine actuator, it does not tie automatically, but works fine with

John Deere 567 baler

Hay Equipment - Menoken, ND

$4,000 OBO

2024-10-31 22:34:40

End of Season Special!! Mechanically a very nice baler. Paint a bit faded, but has many newer parts in it. Sledge frame, lower and middle dimple rollers replaced, all the gears and

NH 688 baler

Hay Equipment - Linton, ND

$7,600

2024-10-30 08:33:50

New Holland 855 Baler Very nice, straight frame, straight angle iron 855 baler picker! New cam bearings, bar bearings, a few teeth and bands. Comes with both gauge wheel assemblies! Looking to

New Holland 855 picker

Hay Equipment - Linton, ND

$3,750 OBO

2024-10-30 07:25:10

03 NH BR780A round baler for sale, field ready in working order with new belts 2

03 NH BR780 round baler for sale, field ready in working order with new belts 2 years ago, small 1000 pto, Twine only, Oldie but goodie for its age, hate to part with it. Pressure washed it up, grease

Hay Equipment - Porcupine, ND

$4,000

2024-10-29 17:17:50

New Holland moisture monitor for baler. This is brand new in box and never used.

Does not include the moisture sensor for baler is just the monitor and cable. New price is $300 asking $200

Hay Equipment - Bismarck, ND

$200

2024-10-29 17:09:42

GOING TO AUCTION IF NOT SOLD BY

2018 Cat Challenger 9960 Windrower with 9296 double conditioner disc header 1800 hrs new windshield included and spare parts.

Hay Equipment - Menoken, ND

$105,000

2024-10-28 06:26:53

12 Photos

Hay trailer

Brand New 42’ Lights Rear hitch Can haul bales like tootsie roll or flat side out Brand new truck axles with 11r 22.5 truck tires

Hay Equipment - Linton, ND

Contact for Price

2024-10-27 17:49:03

Excellent condition. No emails or texts, phone calls only please.

H&S 9 wheel rake

Hay Equipment - Bismarck, ND

$6,200

2024-10-24 19:12:56

2 brand new never used double rib V belts

B190/02 belt # OC Length: 5/8" X 193" fit macdon 7000 and possibly others located in McClusky North Dakota call or text me at 701 460 1359 90$ per can

Hay Equipment - McClusky, ND

$90 Each

2024-10-23 20:02:12

Titan Dual Prong 49" Bale Spear:

I have for sale a Titan Dual Prong 49" Hay Bale Spear Attachment. This bale spear attaches to a tractor or skid steer bucket, and it works great. It has a 3000#

Hay Equipment - Bismarck, ND

$360 OBO

2024-10-23 19:40:36

Off a br 780a, but will fit 660--br7090 balers. newer style cam bearings, new inner pipe bearings and cotter pins, all poly bands. Just bolt up and go! selling with gauge

New Holland baler pickup

Hay Equipment - Linton, ND

$3,650

2024-10-23 19:40:25

First set of used belts are .230 thick and measure 34'-2" long and have NO double splicing. Two season on belts with Good texture to them! WCCO belting not cheap crap you

660-br7090 baler belts

Hay Equipment - Linton, ND

$1,325

2024-10-22 12:31:58

GOING TO AUCTION IF NOT SOLD BY 11/15.

2016 Rowse 27 wheel ultimate with 3 center turn over wheels

Hay Equipment - Menoken, ND

$30,000 OBO

2024-10-22 03:40:50

32 FOOT HYG DUMP RAKE FOR SALE WILL COME WITH HYG CLINDER

ROUSE DUMP RAKE

Hay Equipment - Bismarck, ND

$3,800

2024-10-21 09:00:10

Gehl swing tongue mower conditioner model 2275 it has a 14 ' - 3" cut . Nice

shape . John Deere 24 T square baler . Kilsbro gravity box with trailer . Double Roller barn door track . New Single

Hay Equipment - McClusky, ND

Make an Offer

2024-10-19 01:54:24

1475 New Holland 16’ hay cutter and conditioner!!

Like new 7-0-1-426-1-0-0-2

Hay Equipment - Mandan, ND

Make an Offer

2024-10-18 17:28:26

20 wheel rowse v- rake with 2 additional kicker wheels. All wheels have silencers

and wind gaurds. Tires all good. Many additional rake parts such as teeth, ware parts and problem parts.

Hay Equipment - Steele, ND

$17,500

2024-10-18 06:50:31

HEAVY duty stack mover. Hydraulic operated with tandem wheels. No PTO to

HEAVY duty stack mover. Hydraulic operated with tandem axles. Updated hydraulic orbital motors drive the chains for unloading. The walking beams have updated bushing, and new wheel bearings in

Hay Equipment - Mandan, ND

$2,750

2024-10-17 21:28:36

Massey Ferguson 1386-disc Bine

Razor cutter bar. 2016, Just gone though, New knifes, turtles and Cups. All new bolts and cups. All gear boxes change. Feild ready. Draw bar hitch. Always shredded

Hay Equipment - Mandan, ND

$26,000 OBO

2024-10-17 21:19:01

Rbx 562 Baler (Parts)

Rbx 562 Baler parting out!! Let me know what you might need and I will check it out. Belts and picker are sold. Monitor $900

Hay Equipment - Linton, ND

Multiple Prices

2024-10-17 21:18:47

RBX562 Monitor

Used electric tie monitor, worked before parting out baler. New is $1900, good deal on this one! Even cheaper than a Reman!

Hay Equipment - Linton, ND

$850

2024-10-17 06:26:36

For sale: 4 Durabull rake wheels to fit Vicon, Hand S etc. Great condition. Call

after dark.

Hay Equipment - Mandan, ND

$400

2024-10-14 13:03:55

10 Photos

2010 macdon APT hydro swing hitch. Had a 16 foot macdon A30-D on it. But can have

18 footheaders, or R80, R85 disc headerson itNice and straight. No leaks, 1 new lift cylinder Drawbar style hookup.

Hay Equipment - McClusky, ND

$1,500

2024-10-14 03:06:43

2025 VERMEER VR2040

Wheel Rake, Hydraulic Down Pressure, 40' Working Width, Center Splitter And Wind Guards Optional, 0.9% For 36 Months, 1.9% for 48 Months, 2.9% for 60 Months

Hay Equipment - Mandan, North Dakota

Contact for Price

2024-10-14 03:06:25

Basket Rakes, Full Hydraulic Adjustability From The Seat, 28' Working Width, New Stle Rear Pivot Point, 0% for 48 months, 0.9% for 60 months, 1.9% for 72 months Mandan and Colfax ND

VERMEER R2800

Hay Equipment - Mandan, North Dakota

Contact for Price

2024-10-13 22:14:26